Lenze E94AxPExxxx - Manual (Page 580)

12 Basic drive functions
12.12 Brake control
580
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Process
If all requirements mentioned before have been met, the grinding process can be started by setting
the input BRK_bBrakeGrindIn to TRUE.
[12-46] Sequence of the grinding operation
 C02596 : Grinding speed
 C02597 : Acc./dec. time - grinding
 C02598 : Grinding ON time
 C02599 : Grinding OFF time
CINH = controller inhibit
• After the grinding speed has been reached,
the friction partners in the brake are
ground by a pulse-type control.
• After the brake has been closed and
opened ten times, the direction of rotation
changes and grinding in the opposite
direction is carried out.
• By resetting the input BRK_bBrakeGrindIn
to FALSE the grinding process can be
aborted.
t
Ž
t
Œ

t
t
BRK_bBrakeGrindIn
CINH
n


10 x 10 x