Lenze E94AxPExxxx - Manual (Page 66)

4 PLC functionality
4.7 Completing the PLC project
66
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

How to import the new codes in »Engineer«:
1. Click on the Import PLC application button on the Application parameters tab.
• During the import, error messages and warnings appear in the message window.
• If the checkmark next to Show details has been activated, the codes and error messages
imported into the »Engineer« project are shown in the message window as well.
The parameters imported can be viewed in the All parameters tab in the IEC 1131 parameters
category. The IEC 1131 parameters category only appears if user codes have been created in »PLC
Designer«.
4.7.4.1 Saving the »Engineer« project
The project is saved completely if you
1. save the PLC project using »PLC Designer«
2. save the »Engineer« project using »Engineer«.

Note!
By clicking the Import PLC application button, all data (i.e. files and subdirectories) that
is the same directory as the project file (*.PRO) is imported into the Engineer project.