32 can on board: identify node, Can on board: identify node, 5drive interface – Lenze E94AxPExxxx User Manual
Page 128
5
Drive interface
5.2
Device commands
128
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.32
CAN on board: Identify node
The
= "95: CAN on board: identify node" device command is used to determine the nodes
connected to the CANopen system bus interface of the controller ("CAN on board").
• The result of the CAN bus scan is displayed in
Tip!
For detailed information about the "CAN on board" CANopen system bus interface, please
see the "CAN" Communication Manual.
Possible status displays for this device command
Related device commands
CAN on board: Pred.Connect.Set
Status (
Meaning
6259970 Device command in process
6225920 Device command executed successfully
6225921 General error