Lenze E94AxPExxxx - Manual (Page 154)

5 Drive interface
5.4 Automatic restart after mains connection/trouble...
154
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Auto-start option 1: Auto restart enabled after mains connection
The following illustration shows the state changes for the auto-start option 1 and their relationship
to controller inhibit:
[5-26] State change when auto-restart is enabled (C00142 = "1: Enabled")


Controller pulses are inhibited
Controller pulses are enabled

 With controller inhibit after power-on
Without controller inhibit after power-on
RFR
Œ
0 1
RFR
RFR
RFR
t
t

Initialisation Switched on Operation Ready to switch on
Operation Initialisation Switched on Ready to switch on