Lenze E94AxPExxxx - Manual (Page 584)

12 Basic drive functions
12.13 Cam data management
584
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.13 Cam data management
The basic function "Cam data management" provides different functions for the systemwide
management of the cam data available in the memory module for a cam application.
• Cam data are motion profiles/characteristics, cam tracks, and position marks.
• The cam data required can either be created using the »Cam Editor« and transmitted to the
controller by means of »Engineer«, or they can be directly entered via the parameters of this
basic drive function if cam data have already been downloaded.

Note!
For the use of cam data in the controller, the licence level Motion Control TopLevel is
required!