5drive interface – Lenze E94AxPExxxx User Manual
Page 93
![background image](/manuals/566084/93/background.png)
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
93
5
Drive interface
5.2
Device commands
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Activating device commands via the "Device commands" dialog box
All device commands of the controller are available in »Engineer« in the Device Commands dialog
box:
• The Device commands dialog box can be opened by clicking on the Device commands list field
on the Application parameters tab in the dialog level Overview Drive interface.
• The Device commands dialog box can also be opened by clicking the setting of
on the All
parameters tab.
• During and after the execution of the device command, the processing status is displayed in the
Device Commands dialog box:
Note!
If you click a device command in the list field of the Device commands dialog box, the
corresponding device command is executed immediately!