Lenze E94AxPExxxx - Manual (Page 144)

5 Drive interface
5.2 Device commands
144
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.44 Prepare firmware update
• Only possible when the application has stopped and the controller is inhibited.
Possible status displays for this device command

Note!
For Lenze service only!
The
C00002 = "10000: Prepare firmware update" device command is used to set the
controller to the firmware update mode to update the firmware, if required, using the
corresponding software.
Status ( C00003 ) Meaning
655394050 Device command in process
655360000 Device command executed successfully
655360001 General error