Lenze E94AxPExxxx - Manual (Page 138)

5 Drive interface
5.2 Device commands
138
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.2.39 Save cam data
The C00002 = "502: Save cam data" device command serves to save the cam data available in the
main memory of the controller with mains failure protection in the memory module.
[5-23] "Save cam data" function
• This function is executed in the background and is also possible when the controller is enabled
and the application is running.
• However, this function is only executed if valid cam data are available.
• The cam data can also be saved if previously no cam data have been available on the memory
module.
• While the function is executed, no online change and no change of the cam data via parameters
can be carried out.
• For saving the cam data, you do not need to enter a possibly existing user password ( C02900 ).

Tip!
Detailed information on the access protection can be found in the chapter "Basic drive
functions", subchapter " Cam data management ". ( 584)
9400
RAM Memory module MM
Cam data Cam data
Cam application