Lenze E94AxPExxxx - Manual (Page 756)

15 Parameter reference
15.2 Parameter list | C00003
756
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
19726336 Device command executed successfully 301: Archive parameter set 1
19726337 General error
19760132 File could not be opened.
19760157 Fault while reading out of a file.
19760158 Fault while writing into a file.
19760160 Unexpected end of file.
19760386 Device command in process
19767297 Access to file has been denied since the file is already
accessed from another position
19767301 I/O fault when accessing the file system
19767308 RAM is full
19767309 Access authorisation denied
19767324 No free memory on the memory module
19791872 Device command executed successfully
302: Archive parameter set 2
19791873 General error
19825668 File could not be opened.
19825693 Fault while reading out of a file.
19825694 Fault while writing into a file.
19825696 Unexpected end of file.
19825922 Device command in process
19832833 Access to file has been denied since the file is already
accessed from another position
19832837 I/O fault when accessing the file system
19832844 RAM is full
19832845 Access authorisation denied
19832860 No free memory on the memory module
19857408 Device command executed successfully
303: Archive parameter set 3
19857409 General error
19891204 File could not be opened.
19891229 Fault while reading out of a file.
19891230 Fault while writing into a file.
19891232 Unexpected end of file.
19891458 Device command in process
19898369 Access to file has been denied since the file is already
accessed from another position
19898373 I/O fault when accessing the file system
19898380 RAM is full
19898381 Access authorisation denied
19898396 No free memory on the memory module
Status Meaning Device command