Lenze E94AxPExxxx - Manual (Page 637)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
637
14 Diagnostics & fault analysis
14.4 Logbook
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
14.4.3 Reading out logbook entries
With an online connection, the existing logbook entries can easily be displayed in the »Engineer«.
Alternatively, the logbook entries can also be read out via the corresponding parameters (e.g. using
the keypad).

How to display logbook entries in the »Engineer«:
1. Go to the Project view and select the 9400 Servo PLC controller the logbook entries of which
are to be read out.
2. Click the icon or select the OnlineGo online command to build up an online
connection with the controller.
3. Select the Diagnostics tab from the Workspace.
4. Click the symbol in the diagnostics toolbar to open the Logbook dialog box.
The Logbook dialog box displays all logbook entries available in the device. You can filter the entries
displayed systematically by selecting or defining filter criteria.
Button Function
Export... Exporting logbook entries to a file ( 638)
File in project Storing logbook entries in the project. Logbook entries stored in the project are also
displayed if there is no online connection to the controller (e.g. for service and
documentation purposes).
Deleting in the device Delete all logbook entries available in the device.