Lenze E94AxPExxxx - Manual (Page 538)

12 Basic drive functions
12.11 Limiter
538
Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
LIM_bLimitSwitchPositive
C02719/1 | BOOL
Input for positive travel range limit switch
TRUE Limit switch is activated.
LIM_bLimitSwitchNegative
C02719/2 | BOOL
Input for negative travel range limit switch
TRUE Limit switch is activated.
LIM_bActivateLimitedSpeed
1
C02719/3 | BOOL
Request limited speed 1
• If a setpoint follower is active, no limitation takes place, but an exceeding of the
limit values is displayed via the output LIM_dnState.
TRUE Request limited speed 1.
Identifier
DIS code | data type
Information/possible settings