Lenze E94AxPExxxx - Manual (Page 845)

Lenze · 9400 Servo PLC· Reference manual · DMS 4.0 EN · 11/2013 · TD05/06
845
15 Parameter reference
15.2 Parameter list | C00878
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00878
C00909
C00950
C00951
Parameter | Name:
C00878 | Status DCTRL control input
Data type: UNSIGNED_8
Index: 23697
d
= 5C91
h
Display range (min. value | unit | max. value)
0 1
Subcodes Info
C00878/1 Status of control inputs
C00878/...
C00878/5
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 1
Parameter | Name:
C00909 | Speed limitation
Data type: INTEGER_16
Index: 23666
d
= 5C72
h
Speed limitation for speed setpoint
• For the upper speed limit value only positive values are permissible (0.0 % ... 175.0 %).
• For the lower speed limit value only negative values are permissible (-175.0 % ... 0.0 %).
Setting range (min. value | unit | max. value)
-175.0 % 175.0
Subcodes Lenze setting Info
C00909/1 175.0 % Upper speed limit value
C00909/2 -175.0 % Lower speed limit value
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 10
Parameter | Name:
C00950 | VFC: V/f characteristic shape
Data type: UNSIGNED_32
Index: 23625
d
= 5C49
h
 V/f control
Selection list (Lenze setting printed in bold)
0 Linear (V/f)
1 Quadratic (V/f²)
2 Curve
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 1
Parameter | Name:
C00951 | VFC: V/f base frequency
Data type: INTEGER_32
Index: 23624
d
= 5C48
h
 V/f control
Setting range (min. value | unit | max. value) Lenze setting
1 Hz 5000 50 Hz
 Read access  Write access  CINH  PLC STOP  No transfer Scaling factor: 1