Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications - Manual (Page 140)

4.6 Setup Procedure for Elevator Applications
140 YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
4. Connect the cable to the CN19 connector port on the drive.
Note: The connector port location and angle vary by drive model.
NOTICE: Be sure that the connector fastens at the correct angle to the CN19 connector port. The incorrect angle could damage the
battery, cable, or connector.
Figure 4.32
Figure 4.37 Connecting the Cable
5. The cable should pass through the connector cover with the cover fastened to the drive.
Figure 4.33
Figure 4.38 Reattaching the CN19 Connector Cover
6. Slide the CN19 connector cover back into place as shown in Figure 4.39 .
NOTICE: Make sure the cable does not get pinched between the drive and the CN19 connector cover, as this could damage the cable.
Figure 4.34
Figure 4.39 Sliding the CN19 Connector Cover into Place
Battery cable
Port CN19
PWR LED MONITOR JVOP-184
RUN DS1 DS2
RUN DS1 DS2 STATUS READY
RUN
ALARM(RUN)
PGOH,LT
BB,HBB
EF,SE
Other Fault
OV,UV
OH,OL
OC,GF,SC,PGO
CPF,OFA,OFB,OFC
:LIGHT :BLINK :LIGHT OFF
Downward Leftward