Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications - Manual (Page 31)

1.4 Component Names
YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual 31
Re
ce
iv
ing
1
1.4 Component Names
This section gives an overview of the drive components described in this manual.
Note: 1. Refer to Using the LED Monitor/Digital Operator on page 89 for a description of the operator keypad.
2. The drive may have no cooling fans or only one cooling fan depending on the model.
Figure 1.2
Figure 1.3 Figure 1.4
◆ IP00 Enclosure with Top Protective Cover
■ Three-Phase AC200 V 2A0018D to 2A0094D
Three-Phase AC400 V 4A0009D to 4A0049D
Figure 1.5
Figure 1.2 Exploded View of IP00 Enclosure Drive with
Top Protective Cover (2A0031D)
A – Fan finger guard
<1>
<1> Drive models 2A0018D, 2A0022D, 4A0009D, and 4A0012D have a single cooling fan.
H – Rubber bushing
B – Cooling fan
<1>
I – Top protective cover
C – Mounting hole J – Front cover
D – Heatsink K – USB port (type-B)
E – Optional 24 V DC power
supply connector cover
L – Digital Operator
F – Terminal board M – Terminal cover
G – Bottom cover N – Terminal cover screw
N
A
B
C
I
D
E
F
J
L
M
K
H
G
YEA_TMonl
y