Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications - Manual (Page 62)

3.6 LED Monitor Operator and Front Cover
62 YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
Models 2A0106 to 2A0432 and 4A0056 to 4A0260
1. Remove the terminal cover and the LED monitor.
2. Loosen the installation screw on the front cover.
3. Use a straight-edge screwdriver to loosen the hooks on each side of the cover that hold it in place.
Figure 3.12
Figure 3.13 Remove the Front Cover (Models 2A0106 to 2A0432 and 4A0056 to 4A0260)
4. Unhook the left side of the front cover then swing the left side towards you as shown in Figure 3.14 until the
cover comes off.
Figure 3.13
Figure 3.14 Remove the Front Cover (Models 2A0106 to 2A0432 and 4A0056 to 4A0260)
Hook Hook
Front cover
installation screw
Free hooks on both
sides of the cover