Common_tmonly, 2 mechanical installation – Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications User Manual
Page 43
2.2 Mechanical Installation
YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
43
Me
chanic
al
Ins
ta
lla
tion
2
Installation Types and Required Materials
The LED monitor mounts to an enclosure two different ways:
1.
External/face-mount installs the operator outside the enclosure panel
2.
Internal/flush-mount installs the operator inside the enclosure panel
Table 2.2 LED Monitor Installation Methods and Required Tools
NOTICE: Prevent foreign matter such as metal shavings or wire clippings from falling into the drive during installation and project
construction. Failure to comply could result in damage to the drive. Place a temporary cover over the top of the drive during installation.
Remove the temporary cover before drive start-up, as the cover will reduce ventilation and cause the drive to overheat.
External/Face-Mount
1.
Cut an opening in the enclosure panel for the LED monitorr as shown in
2.
Position the LED monitor so the display faces outwards, and mount it to the enclosure panel as shown in
.
Figure 2.6
Figure 2.7 External/Face-Mount Installation
Figure 2.7
Figure 2.8 Panel Cut-Out Dimensions (External/Face-Mount Installation)
Installation Method
Description
Installation Support Sets
Model
Required Tools
External/Face-Mount
Simplified installation with the digital
operator is mounted on the outside of
the panel with two screws.
–
–
Phillips screwdriver (#1)
Internal/Flush-Mount
Encloses the digital operator in the
panel. The digital operator is flush
with the outside of the panel.
Installation Support Set A
(for mounting with screws through
holes in the panel)
EZZ020642A
Phillips screwdriver (#1, #2)
Installation Support Set B
(for use with threaded studs that are
fixed to the panel)
EZZ020642B
Phillips screwdriver (#1)
Wrench (7 mm)
Digital Operator
M3 × 6
Phillips recessed
pan head machine screw × 2
Enclosure panel
Unit: mm
common_TMonly
22
22
14
26
22
78
2
Unit: mm
common_TMonly