Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications - Manual (Page 214)

5.8 L: Protection Functions
214 YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
Setting 2: Drive dedicated motor (speed range for constant torque: 1:10)
Use this setting when operating a drive duty motor that allows constant torque in a speed range of 1:10. The drive will
allow the motor to run with 100% load from 10% up to 100% speed. Running at slower speeds with full load can trigger
an overload fault.
Setting 3: Vector motor (speed range for constant torque: 1:100)
Use this setting when operating a drive-dedicated motor that allows constant torque in a speed range of 1:100. This motor
type is allowed to run with 100% load from 1% up to 100% speed. Running slower speeds with full load can trigger an
overload fault.
Setting 5: Constant torque PM motors (constant torque range of 1:500)
Sets protection characteristics needed when driving a PM with constant torque. These motors allow for a speed control
from 0.2% to 100% when operating with 100% load. Slower speeds with 100% load will trigger overload.
Overload Tolerance Cooling Ability Overload Characteristics
Motor is designed to effectively cool itself even at
low speeds. Continuous operation with 100% load from 5 Hz to
50 Hz.
Overload Tolerance Cooling Ability Overload Characteristics
Motor is designed to effectively cool itself at ultra-
low speeds. Continuous operation with 100% load from 0.5 Hz to
50 Hz.
Overload Tolerance Cooling Ability Overload Characteristics
Motor is designed to effectively cool itself at ultra-
low speeds (about 0.2% of base speed). Continuous operation with 100% load from 0.2% to
100% of base speed.
A: Max. speed for 200LJ and above
B: Max. speed for 160MJ to 180 LJ
C: Max. speed for 132MJ and below
Rated Speed=100% Speed
60 s
Continuous
A
B
C
Speed (%)
T
orque (%)
100
150
110 100120 167 200
55
50
0
A: Max. speed for 200LJ and above
B: Max. speed for 160MJ to 180 LJ
C: Max. speed for 132MJ and below
150
100
90
50
0
1 100120 167 200
A
B
C
Continuous
Speed (%)
Rated Speed=100% Speed
T
orque (%)
60 s
Percent of base speed (%)
0 0.2 100 130 150
150
100
115
77
67
Instantaneous rating (60 s)
125
83
120
Continuous
T
orque (%)