Reattaching the front cover – Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications User Manual
Page 63
3.6 LED Monitor Operator and Front Cover
YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
63
El
ec
tr
ic
al In
st
al
lat
io
n
3
■
Reattaching the Front Cover
Models 2A0018 to 2A0094 and 4A0009 to 4A0049
Reverse the instructions given in
Remove the Front Cover (Models 2A0018 to 2A0094 and 4A0009 to 4A0049) on
to reattach the front cover. Pinch inwards on the hooks found on each side of the front cover while guiding it back
into the drive. Make sure it clicks firmly into place.
Models 2A0106 to 2A0432 and 4A0056 to 4A0260
1.
Slide the front cover so the hooks on the top connect to the drive.
Figure 3.14
Figure 3.15 Reattach the Front Cover (2A0106 to 2A0432 and 4A0056 to 4A0260)
2.
After connecting the hooks to the drive, press firmly on the cover to lock it into place.