Cooling fan replacement: 4a0094, 4a0114, Removing the cooling fan, Yea_ tmonly yea_ tmonly – Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications User Manual

Page 321

Advertising
background image

7.4 Drive Cooling Fans and Circulation Fans

YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual

321

Pe

ri

od

ic

In

spe

ct

io

n

&

Main

tenan

ce

7

5.

While pressing in on the hooks located on the left and right sides of the fan cover, free the fan cover by lifting the
back end first.

Figure 7.12

Figure 7.12 Reattach the Fan Cover: 2A0106, 2A0144, 4A0056, and 4A0075

6.

Turn the power supply back on and reset the cooling fan operation time for the Maintenance Monitor by setting
o4-03 to 0.

Cooling Fan Replacement: 4A0094, 4A0114

WARNING! Electrical Shock Hazard. Do not connect or disconnect wiring while the power is on. Failure to comply can result in serious

personal injury. Before servicing the drive, disconnect all power to the equipment. The internal capacitor remains charged even after

the power supply is turned off. After shutting off the power, wait for at least the amount of time specified on the drive before touching

any components.

CAUTION! Burn Hazard. Do not touch a hot drive heatsink. Failure to comply could result in minor or moderate injury. Shut off the

power to the drive when replacing the cooling fan. To prevent burns, wait at least 15 minutes and ensure the heatsink has cooled down.

NOTICE: Equipment Hazard. Follow cooling fan replacement instructions. The cooling fan cannot operate properly when it is installed

incorrectly and could seriously damage the drive. Follow the instructions in this manual to replace the cooling fan, making sure that the

label is on top before inserting the cooling fan into the drive. To ensure maximum useful product life, replace both cooling fans when

performing maintenance.

Removing the Cooling Fan

1.

While pressing in on the hooks located on the left and right sides of the fan finger guard, free the fan finger guard
by lifting the back end first.

Figure 7.13

Figure 7.13 Removing the Cooling Fan Cover: 4A0094, 4A0114

YEA_

TMonly

YEA_

TMonly

Advertising