Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Models for Elevator Applications - Manual (Page 42)

2.2 Mechanical Installation
42 YASKAWA ELECTRIC SIEP YAIL1E 01A YASKAWA AC Drive L1000E Technical Manual
◆ LED Monitor Remote Usage
■ Remote Operation
The LED monitor mounted on the drive can be removed and connected to the drive using an extension cable up to 3 m
long to facilitate operation when the drive is installed in a location where it can not be easily accessed.
The LED monitor can also be permanently mounted in remote locations such as panel doors using an extension cable and
an installation support set (depending on the installation type).
Note: Refer to Drive Options and Peripheral Devices on page 335 for information on extension cables and installation support sets.
Figure 2.5
Figure 2.5 Communication Cable Connection
■ LED Monitor Remote Installation
LED Monitor Dimensions
Figure 2.6 LED Monitor Dimensions
S / N : J007XE273710001
02'(/ -923
Operator Drive
Communication Cable Connector
Comm Port
common
_
S / N : J007XE273710001
90
78
60
7.9
Minimum
50 Unit: mm
12.2 1.6 Installation holes (2-M3 screws, depth 5)
44
15
PWR LED MONITOR JVOP-184
RUN DS1 DS2
DS2 STATUS
READY
RUN
ALARM(RUN)
PGOH,LT
Other Fault
C,PGO
CPF,OFA,OFB,OFC
IGHT :BLINK :LIGHT OFF
YEA_TMonl