Metrohm tiamo 2.4 Manual - Manual (Page 1011)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 995
Sensor
Measuring input
Selection of the measuring input the sensor is connected to.
Titrando, 867
Selection
1 | 2
Default value 1
851, 855
Selection
1
Default value 1
Titrino
Selection
1 | 2 | diff.
Default value 1
Sensor
Selection of a sensor of type Temperature sensor or pH Electrode
from the sensors configured in the sensor table.
Selection Sensor name | Temperature sensor | pH Elec-
trode
Default value Temperature sensor
Stirrer
Stirrer
Selection of the stirrer.
Titrando, 855, 856, 867
Selection
1 | 2 | 3 | 4 | off
Default value 1
off
Means that no stirrer will be used.
Stirring rate
Setting the stirring rate. The algebraic sign of the stirring rate changes the
direction in which the stirring is done.
Titrando, 855, 856, 867
Input range
-15 - 15
Default value 8