Metrohm tiamo 2.4 Manual - Manual (Page 1475)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1459
Validity
Validity period of the data in days. If a value is entered here, then the date
in the field Next assignment will be adapted automatically.
Input range 0 - 999 Days
Default value 999 Days
Next assignment
Date on which the next assignment is to be carried out. The date can be
selected by pressing in the dialog window Select date (see Chapter
2.5.1, page 90). After a date has been entered, the value for the Validity
will be automatically adapted.
Selection Date selection
Message
The message options can only be edited if monitoring is switched on.
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the e-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.
[E-mail]
[E-Mail] opens the Send E-mail window (see Chapter 2.6.1, page 93).
Acoustic signal
on | off (Default value: off)
If this option is activated, an acoustic signal will be emitted additionally to
the message defined above.
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then
one of the following actions will be triggered automatically at start test.
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.