Metrohm tiamo 2.4 Manual - Manual (Page 1128)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1112 ￭￭￭￭￭￭￭￭
tiamo 2.4
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection Avantes Spectrometer
Default value Avantes Spectrometer
5.6.5.5.3 CAL Spec - Measuring parameters
Tab: Method ▶ CAL Spec ▶ Properties... ▶ Measuring parameters
Command name
Name of the command.
Entry 25 characters
The parameters for the measuring procedure can be defined on this tab.
Integration time
Integration time for spectrum recording.
Input range 0.01 - 600000 ms
Default value 6 ms
Averaged spectra
Number of spectra that are recorded and averaged.
Input range 1 - 10000
Default value 10
5.6.5.5.4 CAL Spec - Calibration wavelengths
Tab: Method ▶ CAL Spec ▶ Properties... ▶ Calibration wavelengths
Command name
Name of the command.
Entry 25 characters