Metrohm tiamo 2.4 Manual - Manual (Page 1670)

9.4 Databases
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1654 ￭￭￭￭￭￭￭￭
tiamo 2.4
NOTE
A maximum of 4 databases can be opened, but only 2 can be dis-
played at the same time. Databases that are open at the time the
program is ended will be automatically opened the next time the
program is started.
5 Select desired determinations.
6 Click on menu item File ▶ Print ▶ Determination overview….
The dialog window Print determination overview (PDF) opens.
7 Under Selection, select desired determinations.
8 Under Orientation, select the option Portrait format or Land-
scape format.
9 Click on [OK].
The determination overview is opened as PDF file.
9.4 Databases
9.4.1 Database in general
The determination databases that, in contrast to the configuration
database, can be generated by the user and contain the determination
data, are referred to as databases in tiamo. Included among such deter-
mination data are the method data used for the determination, the mea-
sured data generated during the determination and the results calculated
from it.
In local server systems (tiamo light, tiamo full), the databases are stored
on the drives administered by the computer and are only available to
those users registered on that computer who have the appropriate access
permission. In client/server systems (tiamo multi), the databases are
stored on drives administered centrally by the server and are globally avail-
able throughout the entire client/server system, i.e., all users with the
appropriate access permission can use these databases.