Metrohm tiamo 2.4 Manual - Manual (Page 1179)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 1163
Titrando, 846, 856, 867, 814, 815, 855, 864, 874
Input range
0.01 - 166.00 mL/min
Default value maximum mL/min
Stirrer
Stirrer
Selection of the stirrer.
Titrando, 846, 856, 867, 814, 815, 855, 864, 874
Selection
1 | 2 | 3 | 4 | off
Default value 1
off
Means that no stirrer will be used.
Stirring rate
Setting the stirring rate. The algebraic sign of the stirring rate changes the
stirring direction.
Titrando, 846, 856, 867, 814, 815, 855, 864, 874
Input range
–15 - 15
Default value 8
Switch off automatically
on | off (Default value: on)
If this option is activated, the stirrer will be switched off automatically
when the dosing has finished. This parameter is displayed only for Titran-
dos, 846, 856, 867, 814, 815, 855, 864 and 874.
5.6.6.2.3 ADD - Dosing parameters
Tab: Method ▶ ADD ▶ Properties... ▶ Dosing parameters
Command name
Name of the command.
Entry 25 characters
The volume to be dosed as well as the dosing and filling rate are defined
on this tab.
Volume
Fixed volume that is to be dosed.