Metrohm tiamo 2.4 Manual - Manual (Page 1396)

6.6 Subwindow Titrants/Solutions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1380 ￭￭￭￭￭￭￭￭
tiamo 2.4
Record message
The message that the working life has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued, the message that the
working life has expired is automatically saved with the determination.
Cancel determination
The ongoing determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
6.6.3.3 Properties - Titer
Tab: Configuration ▶ Titrants/Solutions ▶ [Edit] ▶ Properties... ▶ Titer
Titer determination
Titer (value)
Titer value of the solution. The value for the titer of a solution used by the
titration commands DET, MET, SET and KFT is available for calculations
as a variable 'Command name.TITER'.
Input range 0.00000 - 9.99999999E+9 (max. 10 digits)
Default value 1.000
Titer (unit)
Titer unit of the solution.
Entry 10 characters
Selection mol/L | mmol/L | µmol/L | g/L | mg/L | µg/L |
mg/mL | ppm | % | mEq/L
Default value mol/L
Date titer det.
Shows the date and time of last titer determination, which are automati-
cally entered with each automatic titer determination or manual entry.
Titer method
Name of the method with which the last titer determination was carried
out. If the titer has been entered manually then manual will be shown
here.
User
Short name of the user logged in during titer determination or when the
titer was entered manually. If the login function is not used, then the user
logged in under Windows will be entered automatically.