Metrohm tiamo 2.4 Manual - Manual (Page 59)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4
￭￭￭￭￭￭￭￭ 43
Identifica-
tion Description Commands
.FP{x}.MEA Measured value for the fixed end-
point x (1 - 9) in mV DET, MET, SET,
KFT, STAT
.FP{x}.MEA Measured value for the fixed end-
point x (1 - 9) in the unit of the
measured value KFC, MEAS (with-
out T/Flow,
Conc, Ref, Spec)
.FP{x}.QTY Measured value for the fixed end-
point x (1 - 9) in µg KFC, BRC
.FP{x}.TEM Temperature for the fixed end-
point x (1 - 9) in °C DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.TIM Time in s until the fixed endpoint
x (1 - 9) is reached DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Conc, Ref, Spec)
.FP{x}.TRN Transmission for the fixed end-
point x (1 - 9) in % MEAS Opt
.FP{x}.VOL Volume for the fixed endpoint x
(1 - 9) in mL DET, MET, SET,
KFT, STAT
.GMA Maximum gas flow rate in
mL/min MEAS T/Flow
.GMI Minimum gas flow rate in mL/min MEAS T/Flow
.GMN Average gas flow rate in mL/min MEAS T/Flow
.GP.VOL Volume for Gran endpoint in mL DET, MET
.GP.MEA Measured value for the Gran end-
point in the unit of the measured
value DET, MET
.GP.TEM Temperature for Gran endpoint in
°C DET, MET
.GP.TIM Time for Gran endpoint in s DET, MET
.HP{x}.MEA Measured value for the HNP x (1 -
9) in mV (HNP = half neutraliza-
tion potential) DET, MET