Metrohm tiamo 2.4 Manual - Manual (Page 839)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 823
Input range 0.0 - 99.9 µL/min
Default value 0.0 µL/min
Stop volume
Stop of the determination when the specified volume has been dosed
since the start of the conditioning. The stop volume should be adjusted to
the size of the titration cell in order to prevent any overflow.
Titrando
Input range
0.000000 - 9,999.99 mL
Default value 20.00 mL
Selection off
Default value off
Stop time
Stop of the determination when the specified time has elapsed since the
start of the conditioning.
Titrando
Input range
1 - 999,999 s
Selection off
Default value off
Stabilizing time
Waiting period until the start of the titration during which the condition
requirement must be continuously fulfilled.
Input range 0 - 999 s
Default value 0 s
Automatic start after sample addition time
on | off (Default value: on)
If this option is activated, then the titration will be started automatically
after the sample addition time.
Sample addition time
Waiting time between stop of conditioning and start of titration during
which the sample can be added.
Input range 0 - 99 s
Default value 0 s