Metrohm tiamo 2.4 Manual User Manual
Page 1041
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.4
■■■■■■■■
1025
Selection
off
Default value
off
off
No stop.
Temperature
Measuring temperature
Temperature of the solution to be measured. If a temperature sensor is
connected, the temperature entered here is ignored.
712
Input range
-170.0 - 500.0 °C
Default value
20.0
856
Input range
-20.0 - 150.0 °C
Default value
20.0
Reference temperature
The electrical conductivity depends greatly on the temperature. The con-
ductivity measured at a particular temperature is thus automatically con-
verted to this reference temperature (usually 20 °C or 25 °C).
712
Input range
-170.0 - 500.0 °C
Default value
20.0
856
Input range
-20.0 - 150.0 °C
Default value
20.0
Selection
off
off
The conductivity at the measuring temperature is displayed.
Temperature compensation
Definition of the type how the temperature compensation is to be carried
out.
Selection
Temperature coefficient | Sample solution
Default value
Temperature coefficient
Temperature coefficient
Manual entry of a constant temperature coefficient.