Metrohm tiamo 2.4 Manual - Manual (Page 1457)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1441
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the e-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.
[E-mail]
[E-mail] opens the Send E-mail window.
Acoustic signal
on | off (Default value: off)
If this option is activated, an acoustic signal will be emitted in addition to
the message defined above.
Action
The actions can only be edited if monitoring for common variables is
switched on.
If, during common variable monitoring, it is found that the validity period
has expired, then one of the following actions will be triggered automati-
cally at the start of the test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period of the common variable has expired will be auto-
matically saved with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
6.9.3.3 Properties - History
Tab: Configuration ▶ Common variables ▶ [Edit] ▶ Properties ▶ Common variable
- 'Name' ▶ History
History table
The table contains the last 10 values for the selected common variable
and cannot be edited or sorted. The individual values are sorted according
to date so that the most up-to-date assignment is shown last.