Metrohm tiamo 2.4 Manual - Manual (Page 50)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
34 ￭￭￭￭￭￭￭￭
tiamo 2.4
Name Syntax Description
System
variables 'SV.Variable
identification' System variables are general varia-
bles which are adopted in the deter-
mination at the start of the determi-
nation.
Common
variables 'CV.Variable
name.Variable
identification' Common variables are client-specific
variables, which are adopted from
the table of the Configuration pro-
gram part at the start of the deter-
mination and assigned to the deter-
mination.
Global var-
iables 'GV.Variable
name.Variable
identification' Common variables apply to all cli-
ents and are adopted from the table
of the Configuration program part
at the start of the determination and
assigned to the determination.
Entering variables
Variables must always be entered and ended with an apostrophe ' (e.g.
'MV.myVariable').
NOTE
When using variables, always observe their data type (Number, Text
or Date/Time).
2.4.3.2 Method variables
Dialog window: Formula editor ▶ Variables
Method variables are method-specific and are defined in the START com-
mand of the method. There the data type (Text, Number, Date/Time)
of the variables is defined. Either sample data variables (Sample size,
Unit, Sample position, ID1 - ID16) or fixed values can be assigned to
these variables. The Variables field of the formula editor lists all the
Method variables that are available for the current method.
Syntax
'MV.Variable name.Variable identification'
Examples: 'MV.TestDate', 'MV.RemainingTime.VAL', 'MV.Test-
Value.OVF'
Method variables can be selected directly in the formula editor under Var-
iables
▶ Method variables so as to avoid syntax errors.