Metrohm tiamo 2.4 Manual User Manual
Page 57
■■■■■■■■■■■■■■■■■■■■■■
2 General program functions
tiamo 2.4
■■■■■■■■
41
Identifica-
tion
Description
Commands
.EP{x}.DME
Measured value differential for
the endpoint x (1 - 9)
MET
.EP.DVT
Drift for the endpoint x (1 - 9) in
µg/min
KFC, BRC
.EP{x}.ERC
ERC for the endpoint x (1 - 9)
DET
.EP{x}.MEA
Measured value for the endpoint
x (1 - 9) in the unit of the mea-
sured value
DET, MET, SET,
KFT, KFC, BRC
.EP{x}.MEP
Number of endpoints in the win-
dow x (1 - 9); 1 = 1 endpoint, 2
= 2 or more endpoints, 3 = EP
corrected with Autodrift, 4 =
EP corrected with manual
drift
DET, MET, SET,
KFT
.EP.QTY
Measured value for the endpoint
in µg
KFC, BRC
.EP{x}.TEM
Temperature for the endpoint x (1
- 9) in °C
DET, MET, SET,
KFT, KFC, BRC
.EP{x}.TIM
Time in s until the endpoint x (1 -
9) is reached
DET, MET, SET,
KFT, KFC, BRC
.EP{x}.VOL
Volume for the endpoint x (1 - 9)
in mL
DET, MET, SET,
KFT
.EPP
Position after finishing the com-
mand. 0 = invalid position.
PORT
.ETE
End temperature (temperature
following processing of the com-
mand) in °C
DET, MET, SET,
KFT, KFC, BRC,
STAT, MEAS
(without T/Flow,
Ref, Spec), CAL
Cond, CAL
MEAS, STDADD,
DOS, ELT MEAS