Metrohm tiamo 2.4 Manual - Manual (Page 1429)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1413
￭ Red, if the values are outside the intervention limits.
If the warning or intervention limits are breached, then the line number
will also be shown with an orange or red background, respectively.
Calibration date
Date and time of the calibration.
Calibration method
Name of the method with which the calibration was carried out. If the cal-
ibration data has been entered manually, then manual will be shown
here.
NOTE
This parameter is not saved on the data chip of intelligent sensors, i.e.,
this parameter will be empty if the data from the sensor is written into
the sensor table.
User
Short name of the user who was logged in during calibration or who
entered the calibration data manually. If the login function was not used,
then the user logged in under Windows will be entered automatically.
NOTE
This parameter is not saved on the data chip of intelligent sensors, i.e.,
this parameter will be empty if the data from the sensor is written into
the sensor table.
History graph
On the two tabs Slope and pH(0) or E(0) the last 10 values are shown
for the selected sensor. As in the history table, the values are shown in dif-
ferent colors:
￭ Blue, if the values have been determined automatically by a method.
￭ Black, if the values have been entered manually.
If limits have been defined, then the warning limits will be shown in
orange and the intervention limits in red.