Metrohm tiamo 2.4 Manual - Manual (Page 1299)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 1283
ied during the method run (see Chapter 5.6.10.2.3, page 1283). The text
editor for entering or changing the message is opened with or by
double-clicking into the text field (see Chapter 2.5.2, page 91).
Entry Text (unlimited)
NOTE
In the event the option Comments on modification of sample data
(live) is enabled in the Security settings, the dialog window Modifi-
cation comment sample data will be displayed after the sample data
is entered, where a Comment and a Reason for the modification must
be entered.
5.6.10.2.3 REQUEST - Sample data request
Dialog window: Workplace ▶ [START] ▶ Sample data request
Message
Displaying the message defined in the command REQUEST.
Sample position
Position of the sample on the Sample Processor rack. This number can be
used for moving to a sample position with the command MOVE when
Target position = Sample position.
Input range 1 - 999
Default value 1
ID1 … ID16
Sample identifications.
Type = Number
Input range
-1.0E-99 - 1.0E+99
Type = Text
Entry
max. 100 characters
Type = Date/Time
Selection
'YYYY-MM-DD' or 'YYYY-MM-DD hh:mm:ss'