Metrohm tiamo 2.4 Manual - Manual (Page 844)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
828 ￭￭￭￭￭￭￭￭
tiamo 2.4
NOTE
The coulometric water determination is mainly used to determine small
amounts of water.
Instruments
This command can be executed with the following devices.
Coulometer: 756, 831
Titrandos: 851, 852
Appearance
The command has the following appearance:
without conditioning with conditioning
Parameters
The parameters for the command KFC are configured in the following 8
tabs:
￭ General/Hardware
Parameters for devices, indicator and generator electrode and stirrers.
￭ Start conditions
Entry of a waiting period before the start of the titration.
￭ Control parameters
Control parameters for the endpoint (measured value for the endpoint,
titration rate, user-defined parameters, stop criterion).
￭ Titration parameters
Parameters for the run of the titration.
￭ Stop conditions
Entry of the stop time which causes the titration to stop.
￭ Conditioning
Enable/Disable the conditioning. Definition of start drift, drift correction
and drift value.
￭ Additional evaluations
Definition of additional methods for the evaluation of the titration
curves.
￭ Additional measured values
Definition of additional measured values of other measuring com-
mands which are saved as additional columns in the measuring point
list.