Metrohm tiamo 2.4 Manual User Manual
Page 1243
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.4
■■■■■■■■
1227
Pumps
Tower
Selection of the tower of the Sample Processor for moving to the required
lift position. Both Tower 1 and Tower 2 can always be selected even if the
Sample Processor has only one tower.
Selection
1 | 2
Default value
1
Pump(s)
Selection of the pump that is to be actuated. The pump(s) can either be
built-in or externally connected. With 1+2 both pumps at the selected
tower will be switched at the same time.
Selection
1 | 2 | 1+2
Default value
1
1
Pump 1 is actuated.
2
Pump 2 is actuated.
1+2
Both pumps at the selected tower will be switched at the same time.
Actions
Selection
Switch on | Switch off | Duration
Default value
Switch on
Switch on
Switch on the pump(s).
Switch off
Switch off the pump(s).
Duration
Switch on the pump(s) for a particular period.
Input range
0 - 9999.9
Default value
10.0
Selection
s | min
Default value
s