Metrohm tiamo 2.4 Manual - Manual (Page 850)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
834 ￭￭￭￭￭￭￭￭
tiamo 2.4
851, 852
Input range
-15 - 15
Default value 8
Switch on/off automatically
on | off (Default value: on)
If this option is enabled, the stirrer will be switched on automatically at
the start of the command and will be switched off automatically at the
end of the command.
5.6.3.6.3 KFC - Start conditions
Tab: Method ▶ KFC ▶ Properties... ▶ Start conditions
Command name
Name of the command.
Entry 25 characters
Pause
Pause
Waiting time before the start of the titration.
Input range 0 - 999999 s
Default value 0 s
5.6.3.6.4 KFC - Control parameters
Tab: Method ▶ KFC ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Entry 25 characters
Endpoint
EP with
Measured value for the endpoint.
756, 831
Input range
-2000.0 - 2000.0 mV
Default value 50.0 mV
851, 852
Input range
-1250.0 - 1250.0 mV
Default value 50.0 mV