Metrohm tiamo 2.4 Manual - Manual (Page 58)

2.4 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
42 ￭￭￭￭￭￭￭￭
tiamo 2.4
Identifica-
tion Description Commands
.ETR Result of the electrode test.
Electrode quality:
0 = No data available
1 = Short circuit
2 = Excessive start drift
3 = Wrong buffer
4 = Problems with the diaphragm
5 = Reference system defective
6 = No buffer values for the tem-
perature or excessive deviation of
the temperature between buffers
7 = Partial short circuit
8 = Glass defective
9 = Poor electrode
10 = Usable electrode
11 = Good electrode
12 = Excellent electrode
ELT LOOP
.EVT End volume (total dosed volume
at the end of the command) in
mL DET, MET, SET,
KFT, STAT, DOS
.FIN Command status; 1 = Command
has ended at least once, 0,
invalid (variable not available) =
Command has never ended All except START
and END
.FP{x}.CNT Intensity for the fixed endpoint x
(1 - 9) in counts MEAS Opt
.FP{x}.DME Measured value differential for
the fixed endpoint x (1 - 9) MET
.FP{x}.DVT Drift for the fixed endpoint x (1 -
9) in µg/min KFC, BRC
.FP{x}.ERC ERC for the fixed endpoint x (1 -
9) DET