Metrohm tiamo 2.4 Manual - Manual (Page 837)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
tiamo 2.4
￭￭￭￭￭￭￭￭ 821
Stop volume
Stop when the entered volume has been added after the start of the titra-
tion (including start conditions). The stop volume should be adapted to
suit the sample size or the titration vessel size.
Titrando
Input range
0.00000 - 9,999.99 mL
Default value 100.000 mL
Selection off
Titrino
Input range
0.00 - 9,999.99 mL
Default value 100.00 mL
Selection off
Stop time
Titrando
Input range
0 - 999,999 s
Selection off
Default value off
off
Stop when the entered time has elapsed after the start of the titration
(including start conditions).
Filling rate
Rate at which the dosing cylinder is to be filled after the titration. The
maximum filling rate depends on the cylinder volume of the exchange unit
or dosing unit used.
Titrando
Input range
0.01 - 166.00 mL/min
Selection maximum
Default value maximum
Titrino
Input range
0.01 - 150.00 mL/min
Selection maximum
Default value maximum