Metrohm tiamo 2.4 Manual - Manual (Page 1512)

7.5 855 Robotic Titrosampler
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1496 ￭￭￭￭￭￭￭￭
tiamo 2.4
Action
The actions can only be edited if monitoring is switched on.
If during monitoring it is found that the validity period has expired then
one of the following actions will be triggered automatically at start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the sequence or cancel it. If the sequence is continued then the
message that the validity period has expired will be automatically saved
with the determination.
Cancel determination
The running determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].
7.5 855 Robotic Titrosampler
7.5.1 855 Robotic Titrosampler - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the 855 Robotic Titrosampler are set on the fol-
lowing tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Measuring inputs
Properties of the measuring inputs.
￭ MSB #
Properties of the MSB connector 1 - 3 and the peripheral devices con-
nected to it.
￭ Tower
Properties of tower 1.
￭ Rack
Information on the rack attached.
￭ Initializing position
Defining a position which is automatically approached when the sam-
ple changer is initialized.