2 set - control range, 3 set ph, 1 set ph - overview – Metrohm tiamo 2.4 Manual User Manual
Page 711
■■■■■■■■■■■■■■■■■■■■■■
5 Method
tiamo 2.4
■■■■■■■■
695
■
SET Upol
Amperometric measurement with selectable polarization voltage (mea-
sured quantity current I).
■
SET Ipol
Voltametric measurement with selectable polarization current (mea-
sured quantity voltage U).
5.6.3.4.2
SET - Control range
Menu item: Method
▶ SET ▶ Properties... ▶ Control parameters
Set a large control range for steep curves and a small control range for flat
ones. A good approximation for the start of the control range is given by
the point where the tangents intersect.
5.6.3.4.3
SET pH
5.6.3.4.3.1
SET pH - Overview
Dialog window: Method
▶ SET pH ▶ Properties... ▶ SET pH - 'Command name'
Command for endpoint titrations with potentiometric pH measure-
ment.
Devices
This command can be executed with the following instruments:
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,
906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
Robotic Titrosampler: 855
Appearance
The command has the following appearance: