Metrohm tiamo 2.4 Manual - Manual (Page 1348)

6.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1332 ￭￭￭￭￭￭￭￭
tiamo 2.4
Result templates
on | off (Default value: on)
Importing saved result templates (see Chapter 5.6.8.2.6.1, page 1253).
Export templates
on | off (Default value: on)
Importing saved export templates (see Chapter 4.4.4.1, page 259).
Control chart templates
on | off (Default value: on)
Importing saved control chart templates (see Chapter 4.4.2.1, page 249).
Overlay curve templates
on | off (Default value: on)
Importing saved curve overlay templates (see Chapter 4.4.3.1, page 253).
Buffer data
on | off (Default value: on)
Importing configuration data for custom buffers (see "Buffer table", page
1336).
Conductivity standards
on | off (Default value: on)
Importing configuration data for conductivity standards (see Chapter
6.3.3.4.1, page 1340).
E-mail templates
on | off (Default value: on)
Importing saved e-mail templates (see Chapter 6.3.3.5, page 1342).
Text templates
on | off (Default value: on)
Importing saved text templates (see Chapter 3.5, page 128).
Sample assignment table
on | off (Default value: on)
Importing a saved sample assignment table (see Chapter 3.4, page 125).