Metrohm tiamo 2.4 Manual - Manual (Page 1637)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
8 Manual control
tiamo 2.4
￭￭￭￭￭￭￭￭ 1621
Input range 100.0 - 2000.0 nm
Default value 1000.0 nm
Integration time
Integration time for spectrum recording.
Input range 0.01 - 600000 ms
Default value 6 ms
Averaged spectra
Number of spectra that are recorded and averaged.
Input range 1 - 10000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.
Input range 0 - 100 Pixels
Default value 0 Pixels
Flash rate
Number of flashes per second of a pulsed xenon lamp as light source.
Input range 0 - 100 Hz
Selection off
Default value off
off
For the continuous type of the light source.
[Start]
Starts measurement of the intensity.
[Stop]
Stops measurement of the intensity.
8.4.5.4 Measure - Sample spectrum
Tab: Manual ▶ Sample spectrum
Here a sample spectrum can be measured and displayed.