Metrohm tiamo 2.4 Manual - Manual (Page 200)

3.8 Subwindow Live display
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
184 ￭￭￭￭￭￭￭￭
tiamo 2.4
MET
Selection
Volume | Measured value | Time | Tempera-
ture | dMW | Calculated 1…3 | External 1…3
Default value Volume
SET
Selection
Time | Measured value | Temperature | Vol-
ume | dV/dt | Calculated 1…3 | External 1…3
Default value Time
KFT
Selection
Time | Measured value | Temperature | Vol-
ume | dV/dt | Calculated 1…3 | External 1…3
Default value Time
KFC / BRC
Selection
Time | Measured value | Quantity | Drift |
Charge | dV/dt | Ugen | Igen | Calculated 1…3 |
External 1…3
Default value Time
STAT
Selection
Time | Measured value | Temperature | Vol-
ume | dV/dt | Calculated 1…3 | External 1…3
Default value Time
MEAS
Selection
Time | Measured value | Temperature | dMW/
dt | Calculated 1…3 | External 1…3
Default value Time
MEAS T/Flow
Selection
Time | Measured value | Flow | Calculated 1…
3 | External 1…3
Default value Time
MEAS TC Cond
Selection
Temperature | Measured value | Time | dMW/
dt | Calculated 1…3 | External 1…3
Default value Temperature
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | d
ε/dt |
Calculated 1...3 | External 1...3
Default value Time