Metrohm tiamo 2.4 Manual - Manual (Page 63)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
tiamo 2.4
￭￭￭￭￭￭￭￭ 47
Identifica-
tion Description Commands
.MA.TEM Temperature for the maximum
measured value in °C DET, MET, SET,
KFT, STAT, MEAS
(without Conc,
Ref, Spec)
.MA.TIM Time in s until the maximum mea-
sured value is reached DET, MET, SET,
KFT, STAT, MEAS
(without Conc,
Ref, Spec)
.MA.TRN Transmission for maximum mea-
sured value in % MEAS Opt
.MA.VOL Volume at maximum measured
value in mL DET, MET, SET,
KFT, STAT
.MI.CNT Intensity for minimum measured
value in counts MEAS Opt
.MI.MEA Minimum measured value in the
unit of the measured value DET, MET, SET,
KFT, STAT, MEAS
(without Conc,
Ref, Spec)
.MI.TEM Temperature at minimum mea-
sured value in °C DET, MET, SET,
KFT, STAT, MEAS
(without Conc,
Ref, Spec)
.MI.TIM Time for the minimum measured
value in s DET, MET, SET,
KFT, STAT, MEAS
(without Conc,
Ref, Spec)
.MI.TRN Transmission for minimum mea-
sured value in % MEAS Opt
.MI.VOL Volume at minimum measured
value in mL DET, MET, SET,
KFT, STAT
.MN.MEA Average of the measured value in
the unit of the measured value MEAS T/Flow
.MR.MRC Correlation coefficient for mean
dosing rate for the whole range STAT, DOS