Metrohm tiamo 2.4 Manual - Manual (Page 1346)

6.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1330 ￭￭￭￭￭￭￭￭
tiamo 2.4
Security settings
on | off (Default value: on)
Exporting security settings (see Chapter 6.2.2.1, page 1312).
User administration
on | off (Default value: on)
Exporting user administration (see Chapter 6.2.1.1, page 1303).
[OK]
The Save dialog window for saving data, in which the name and directory
for the export file must be entered, opens. The selected configuration
data is then saved in a file with the extension .mcfg.
6.3.1.2 Importing configuration data
Dialog window: Configuration ▶ File ▶ Import… ▶ Import configuration data
With File ▶ Import… and after selection of the *.mcfg file to be impor-
ted, the Import configuration data dialog window opens, in which the
following parts of the configuration database can be selected for import:
NOTE
Data that is not present in the export file cannot be selected.
Devices
on | off (Default value: on)
Importing configuration data for devices (see Chapter 6.5.1, page 1368).
Solutions
on | off (Default value: on)
Importing configuration data for titrants and solutions (see Chapter
6.6.2.1, page 1374).
Sensors
on | off (Default value: on)
Importing configuration data for sensors (see Chapter 6.7.2.1, page
1397).