Metrohm tiamo 2.4 Manual - Manual (Page 916)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
900 ￭￭￭￭￭￭￭￭
tiamo 2.4
Titrando, 855
Input range
0 - 999,999 s
Default value 0 s
Start volume
Start volume
Volume to be added before the start of the titration at the dosing rate
indicated.
Titrando, 855
Input range
0.00000 - 9999.99 mL
Default value 0.00000 mL
Titrino
Input range
0.00 - 999.99 mL
Default value 0.00 mL
Dosing rate
Speed at which the start volume is to be added. The maximum dosing rate
depends on the cylinder volume of the exchange unit or dosing unit used.
Titrando, 855
Input range
0.01 - 166.00 mL/min
Selection maximum
Default value maximum
Titrino
Input range
0.01 - 150.00 mL/min
Selection maximum
Default value maximum
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a
reaction time after the addition of the start volume. The pause follows at
the end of all the start conditions.
Input range 0 - 999999 s
Default value 0 s