Metrohm tiamo 2.4 Manual - Manual (Page 576)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
560 ￭￭￭￭￭￭￭￭
tiamo 2.4
Input range 2 - 20
Default value 5
Window
A range (window) can be defined on the measured value axis, on the vol-
ume axis or on the time axis. The break-point evaluation will only be car-
ried out in the defined window. Only the first break-point in the defined
window will be recognized.
Selection Measured value | Volume | Time | off
Default value off
Lower limit
Value for the lower limit of the window.
Window = Measured value
Input range
-200.0 - 200.0 µA
Default value -200.0 µA
Window = Volume
Input range
0.00000 - 9999.99 mL
Default value 0.00000 mL
Window = Time
Input range
0 - 999999 s
Default value 0 s
Upper limit
Value for the upper limit of the window.
Window = Measured value
Input range
-200.0 - 200.0 µA
Default value 200.0 µA
Window = Volume
Input range
0.00000 - 9999.99 mL
Default value 9999.99 mL
Window = Time
Input range
0 - 999999 s
Default value 999999 s