Metrohm tiamo 2.4 Manual - Manual (Page 1222)

5.6 Commands
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1206 ￭￭￭￭￭￭￭￭
tiamo 2.4
Volume
Enter the volume to be moved. This parameter is available only for the
Functions Dosing or Aspirate.
Dosing
Input range 0.00000 - 99999.9 mL
Default value 10.0000 mL
Aspirate
Input range 0.00000 - 50.0 mL
Default value 10.0000 mL
Rate
Speed at which the commands Dosing, Fill, Aspirate, Eject and
Exchange position are carried out. The maximum rate depends on the
cylinder volume of the exchange unit or dosing device used. Aspiration
and Ejection of the sample should be done at a rate <10 mL/min.
Input range 0.01 - 166.00 mL/min
Selection maximum
Default value maximum