Metrohm tiamo 2.4 Manual - Manual (Page 1433)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
tiamo 2.4
￭￭￭￭￭￭￭￭ 1417
Warning limits for slope (for pH and ISE electrodes only)
on | off (Default value: off)
If this option is activated, then the values for the slope will be shown in
orange if the limits are exceeded.
Lower limit
Lower warning limit for the slope.
for pH electrode
Input range
–2.147E+9 - 2.147E+9 %
Default value 97.5 %
for ISE (+1)
Input range
–2.147E+9 - 2.147E+9 mV
Default value 57.2 mV
for ISE (–1)
Input range
–2.147E+9 - 2.147E+9 mV
Default value –61.2 mV
for ISE (+2)
Input range
–2.147E+9 - 2.147E+9 mV
Default value 27.7 mV
for ISE (–2)
Input range
–2.147E+9 - 2.147E+9 mV
Default value –31.7 mV
for ISE (+3)
Input range
–2.147E+9 - 2.147E+9 mV
Default value 17.7 mV
for ISE (–3)
Input range
–2.147E+9 - 2.147E+9 mV
Default value –21.7 mV
for ISE (+4)
Input range
–2.147E+9 - 2.147E+9 mV
Default value 12.8 mV
for ISE (–4)
Input range
–2.147E+9 - 2.147E+9 mV
Default value –16.8 mV